Radial Press Box & Signal Splitter
Press Box & Signal Splitter
The mPress is a modular & expandable press box that distributes audio to multiple destinations simultaneously, with two on-board microphone preamps and additional controls that eliminate the need for a separate mixer when feeding both a PA and a press gallery.
- Press box & splitter with expandable outputs
- Dual mic preamps with on-board limiter
- Program inputs for background music playback
- Built-in test tone for easy calibration & troubleshooting
Audio distribution & control for small or large events
The mPress provides full control over any size of press gathering, from community gatherings to international events, and its modular design means it can grow to suit your needs. It features two balanced mic or line inputs with low-noise preamps and high-pass filters, along with a shared limiter to avoid clipping the inputs of any connected recording devices. Separate outputs are provided for a set of powered speakers, with dedicated program inputs that allow you to play background music through the PA when on standby, and a headphone output to silently monitor and cue up playback tracks. The main outputs are controlled separately from the press gallery signals, so you can make adjustments on the fly without affecting previously calibrated recording devices.
Expand output channels with the Exo-Pod
For events where more than eight press outputs are required, the mPress can be used in conjunction with a number of Exo-Pod portable splitters to quickly increase the available channel count. The mPress modular approach replaces the mess of cables that hampers typical press box setups, and instead creates an orderly system that enables you to create zones for various groups within the venue. From each of the mPress XLR outputs as many as four Exo-Pods may be chained together, for a total of 320 microphone or line level outputs and 128 recorder outputs. A built-in 1kHz test tone provides everyone with a reference level and a headphone amplifier on the front of the mPress helps when troubleshooting.
Using the mPress as a basic eight out press box
In this setup, you are using the eight balanced outputs on the mPress to feed the press gallery without using the Exo-Pods. Set the outputs to low and connect using standard mic cables.
Using the mPress in a star configuration
Connect as many as eight Exo-Pods to the mPress to create eight separate zones – each with 14 outputs for a total of 112 press feeds. All of the outputs are isolated to eliminate noise!
Extending the outputs in a series configuration
Daisy-chain one Exo-Pod into the next to expand the system while reducing cable mess. Setting the mPress outputs to high enables almost unlimited press feeds!
|Audio circuit type:||Low Noise Active Buffer|
|Frequency response:||20Hz to >20KHz +0/-1.5dB|
|Gain:||+51dB (Microphone), 0dB (Line Input), +19dB (Program)|
|Clip Level:||+24dBu/+17dBu (Main Output)|
|Total harmonic distortion:||<0.001% @ +4dB|
|Intermodulation Distortion:||0.002% (Main Output)|
|Phase Deviation:||±15° (Exo-Pod Output)|
|Input Impedance:||7k Ω (Microphone), 22K Ω (Program)|
|Output Impedance:||880 Ω (Main Output), 115 Ω (Exo-Pod Output)|
|Equivalent Input Noise:||-111dBu (Main Output)|
|Noise:||-94dBu (Microphone), -80/-92dBu (Exo-Pod Output – Program In to Main Out)|
|Input Connectors:||4 XLR female inputs, 6 ¼” program inputs, XLR power supply input|
|Output Connectors:||2 XLR male gallery outputs, 2 XLR male main outputs, 6 XLR male Exo-Pod/gallery outputs, 2 ¼” main outputs|
|Extras:||Low-Cut Filter: 100Hz (12dB/Octave) (Microphone), Limiter Threshold: -10dBu to +5dBu Output (Microphone), Limiter Ratio (>20:1) (Microphone), Microphone Signal Present LED Threshold: -70dBu/-54dBu/-42dBu (Exo-Pod Output)|
|Construction:||14-gauge steel chassis & outer shell|
|Size (L x W x D):||19″ x 7″ x 1.62″ (48.26cm x 17.8cm x 4.13cm)|
|Shipping size (L x W x D):||22″ x 10.375″ x 4.5″ (55.9cm x 26.4cm x 11.4cm)|
|Shipping weight:||8.9lb (4.04kg)|
|Power:||±15V/+5V custom power supply|
|Conditions:||For use in dry locations only between 5°C and 40°C|
|Warranty:||Radial 3-year, transferable|