คำอธิบาย...
Neumann KH 750 DSP D G ตู้ลําโพงซับวูฟเฟอร์ 10 นิ้ว พร้อมแอมป์ขยาย 250 วัตต์
Designed to complement both small rooms small studio monitoring systems, the Neumann KH 750 is a DSP-powered, 10″ subwoofer capable of reproducing 18 to 300 Hz at SPLs of 105 dB. This model supplies a flexible 2.0/0.1 Bass Manager, so the sub can be implemented in many different scenarios. Use the KH 750 for the LFE channel in a 5.1 setup or as a sub in a conventional stereo mix position. The KH 750 can be easily integrated with Neumann’s range of monitors and is suitable for use in mixing, mastering, music, and broadcast.
The KH 750 has multiple rear-panel options to suit various configurations such as four different routing modes. Analog and digital I/O is on hand, as are fourth-order DSP crossovers and acoustical controls to integrate the sub into your room. Using the RJ45 connection, you can utilize Neumann.Control, which operates over a standard IP network and offers controls for the KH 750 not found on the physical sub itself. These controls make it easier to set up, align, and operate the sub within your system, even in small locales. The Neumann.Control software can be controlled by means of your computer or an iPad.
Use the KH 750 to complement your small studio monitoring rig, and in doing so, relive the burden of bass extension from your existing monitoring system. By implementing this sub, you’ll also notice a marked decrease of harmonic and intermodulated distortion from your main monitors, as that load has now been lessened. A pleasant side effect will be the ability to increase the overall SPL of your loudspeakers, so you can check for how the mix sounds at louder levels without inducing distortion.
Features
- DbxsLr4MV-m3EOA_5T”>
- 10″ DSP Powered Subwoofer
- Designed for Small Rooms & Monitors
- 18 to 300 Hz Response
- Can Handle up to 105 dB SPL
- Integrates with Neumann Monitors
- Ethernet Control over Alignment & Setup
- Low-Pass Filtering, 180° Phase Inversion
- Analog XLR & BNC-AES I/O
- For LFE or Sub Channels
Specs
Monitor Type | Active Subwoofer |
Enclosure | Sealed, Shielded |
Power Rating | 256 W |
Drivers | LF Driver: 1 x10″ / 254 mm Woofer |
Frequency Range | 18 Hz to 300 Hz |
Frequency Response | 18 Hz to 800 Hz ± 6 dB |
Maximum Sound Pressure Level (SPL) | 105 dB |
Dynamic Range | 119 dBA |
THD+N | < -100 dB (Analog) < 90 dB (Digital) |
Maximum Input Level | +24 dBu |
Analog Input Sensitivity/Gain | +2 dB to -12 dB |
Self-Generated Noise | Less Than 20 dBA (at 3″ / 10 cm) |
Phase Adjustment | Phase Inversion 0 / 180° |
Protections and Limiting | Limiter, Peak Limiter, Thermal Limiting |
CMRR | 56 dB |
EQ | 1 x LF Shelf dB 1 x HF Shelf dB |
Filters | 1 x Low-Pass |
Crossover Frequency | 80 Hz |
Crossover Type | Active |
Audio I/O | 2 x XLR Balanced Female Analog Input 2 x XLR Balanced Male Analog Output 1 x BNC AES/EBU Female Digital Input 1 x BNC AES/EBU Female Digital Output |
USB & Network I/O | 1 x RJ45 (Controller) |
AC Input Power | 100 to 240 VAC, 50/60 Hz |
Power Consumption | 410 W (Maximum) |
Operating Temperature | 50 to 104°F / 10 to 40°C |
Operating Humidity | 90% |
Storage Temperature | -13 to 158°F / -25 to 70°C |
Enclosure Material | Aluminum, Wood |
Dimensions (W x H x D) | 13 x 15.1 x 15.1″ / 330 x 383 x 383 mm (Each) |
Weight | 43.0 lb / 19.5 kg (Each) |