คำอธิบาย...
English Description Rupert Neve Designs RMP-D8 8-Channel Class-A Remote Control Dante Mic Pre Below
The Rupert Neve Designs RMP-D8 is an 8-channel Dante microphone preamplifier designed to deliver classic Neve tone, high-resolution A/D conversion, and reliable Dante network integration for recording and mixing engineers in broadcast, houses of worship, and live stage applications.
The eight Class-A mic preamps, which offer up to 60 dB of gain in 1 dB increments, are paired with custom Rupert Neve Designs transformers. Mic or line inputs can be utilized via the eight XLR-1/4″ combo jacks. Mastering-grade converters operate at up to 24-bit/192 kHz resolution and feed digital signal simultaneously to dual Dante network ports and four 2-channel AES XLR outputs.
Each channel features selectable 48 VDC phantom power, polarity, a -10 dB pad, and an 80 Hz high-pass filter. RMP-D8 parameters can be viewed and adjusted locally via the large OLED display and front-panel controls, or remotely over the network. Built with touring in mind, the RMP-D8 boasts a reinforced steel chassis, redundant international power supplies, and latching IEC power cables.
Features:
- 8-channel Dante remote-control microphone preamp
- 8 mic/line inputs with 48V phantom power, polarity reverse, input pad, and highpass filter
- 1dB-stepped, remotely controllable Class A mic preamplifiers with 60dB of gain
- Custom Rupert Neve Designs transformers for the larger-than-life sound of Rupert’s classic module designs
- Mastering-grade 24-bit/792kHz converters with precision-controlled internal clocking and enhanced jitter reduction
- Robust redundant power supplies capable of worldwide operation
- Dante integration with redundant network ports for maximum reliability
- Gain-compensated secondary output option with ±72dB range
- 4 dual-channel AES outputs on XLR connectors
- Large OLEO display with full local control; accurate, easy-to-read meters
- Complete integration with Dante Virtual Soundcard and Dante Via for direct computer input
- Rugged, reinforced-steel chassis for enhanced RF shielding and use in challenging tour environments
Specifications
| Number of Channels | 8 |
| Inputs | 8 x XLR/TRS combo jacks |
| Outputs | 4 x XLR 3-pin jacks (eight AES digital channels) |
| Network | 2 x RJ45 ports (primary and secondary Dante network connections) |
| A/D and D/A Conversion | Up to 24-bit/192 kHz resolution |
| Phantom Power | 48 VDC, selectable per channel |
| Gain Range | 0 to 60 dB in 1 dB steps |
| Input Impedance | 5.5 kOhms |
| Maximum Input Level | +25.5 dBu |
| Dynamic Range | 110 dB |
| Frequency Response | 20 to 50 Hz (-0.5 dB) 50 Hz to 12.5 kHz (-0.1 dB) 12.5 to 40 kHz (+0.2 dB) |
| Noise | -91 dBFS at +60 dB Gain: (150-Ohm balanced source, AES output, 22 Hz to 22 kHz, unweighted) -110 dBFS at Unity Gain: (150-Ohm balanced source, AES output, 22 Hz to 22 kHz, unweighted) |
| Signal-to-Noise Ratio (SNR) | 84.4 dB |
| Pad | -10 dB |
| High-Pass Filter | -3 dB at 80 Hz, 12 dB/octave slope |
| Power Connectors | 2 x IEC ports (main and redundant PSU inputs) |
| Power Requirement | 100 to 240 VAC, 50/60 Hz, 150 W |
| Construction Material | Reinforced steel chassis |
| Dimensions | 19.0 x 12.0 x 3.5″ / 48.3 x 30.5 x 8.9 cm |
| Weight | 13.5 lb / 6.1 kg |
| Specialties | 1 x USB Type-A port for firmware updates OLED display |
