คำอธิบาย...
คำบรรยายไทย
Pocket Bass Amp มีตัวเลือกการปรับแต่งเสียงที่หลากหลายสำหรับเบสแบบแอคทีฟและพาสซีฟ จึงเป็นเอฟเฟกต์และปรีแอมป์อเนกประสงค์ ที่สมบูรณ์แบบสำหรับการร้องสด บันทึกเสียง และฝึกซ้อม มีโหมดคลีน โอเวอร์ไดรฟ์ และฟัซพร้อมไดรฟ์ที่ปรับได้และความอิ่มตัว EQ 3 แบนด์พร้อมการควบคุมกลางแบบกึ่งพาราเมตริกที่ปรับแต่งมาโดยเฉพาะสำหรับเบส และการจำลองตู้แบบวินเทจหรือโมเดิร์น การควบคุมการผสมผสานช่วยให้คุณสามารถผสมสัญญาณโดยตรงและสัญญาณเอฟเฟกต์
Pocket Bass Amp มีช่องสำหรับใส่เอฟเฟ็กต์ภายนอก, อินพุตสายสเตอริโอ 3.5 มม. และเอาต์พุตหูฟังเพื่อการฝึกเล่นไปพร้อมๆกัน และแจ็คfootswitch-assignable เพื่อการจูนแบบไม่มีเสียง การเปิดใช้งานแอปพลิเคชัน DI เอาต์พุต XLR แบบสมดุลสามารถสลับเอฟเฟกต์ก่อนหรือหลังได้ Pocket Bass Amp ต้องใช้แบตเตอรี่ 9 โวลต์หรืออะแดปเตอร์จ่ายไฟ และกล่องหุ้มแบบหล่อโลหะที่ทนทาน พร้อมด้วย Footswitch ไฟแสดงสถานะ LED ที่สะดวกสบาย และ Ground lift
คุณสมบัติ
- Pedal ปรีแอมป์เบสอเนกประสงค์
- ใช้งานได้กับอุปกรณ์เบส เพาเวอร์แอมป์ โต๊ะมิกซ์ และเป็นแอมป์หูฟัง
- สวิตช์แพดสำหรับใช้กับเบสแบบแอคทีฟและพาสซีฟ
- โหมด Clean, Overdrive และ Fuzz
- การควบคุมไดรฟ์และ saturation
- EQ 3 แบนด์พร้อมการควบคุมกลางแบบกึ่งพารามิเตอร์
- การจำลองตู้แบบวินเทจ และโมเดิร์น
- การควบคุมการผสมสำหรับการผสมสัญญาณแบบ Wet และ Dry
- XLR 3 pin สำหรับ DI แบบ Balance สลับเอฟเฟกต์ก่อนหรือหลังได้
- เอาต์พุต Footswitch ที่กำหนดได้ผ่าน (จูนเนอร์)
- Insert, อินพุตสายสเตอริโอและ Ground lift
สเปค
- เทคโนโลยี : โซลิดสเตต
- อินพุต : 2
- ช่องเสียบอินพุต : แจ็ค 6.3 มม
- อิมพีแดนซ์อินพุต : 1 M โอห์ม
- เอาท์พุต : 4
- ขั้วต่อเอาต์พุต : TS 2 x 6.3 มม., แจ็ค 3.5 มม., XLR
- อิมพีแดนซ์เอาต์พุต : TRS 10,000 โอห์ม, XLR 510 โอห์ม
- ช่อง : 1
- สวิทช์ : เปิด/ปิด, Peak, สัญญาณ
- ควบคุม : เบส, ไดรฟ์, การยกกราวด์, เสียงสูง, แผงอินพุต, กลาง, ความถี่กลาง, โหมด, ปิดเสียง, ก่อน/โพสต์, ระดับเสียง
- ลูป : FX
- แรงดันไฟฟ้า : บล็อก 9 V, แหล่งจ่ายไฟ 9 V DC
- วัสดุตู้ : อะลูมิเนียมหล่อขึ้นรูป
- กว้าง : 100 มม
- ลึก : 100 มม
- ความสูง : 55 มม
- น้ำหนัก : 0.36 กก
English Descriptions about Palmer POCKET AMP BASS Portable Bass Preamp Below
Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that‘s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals.
The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
Features
- Multi-purpose bass effects pedal and preamp
- Works with any bass rig, power amp, mixing desk and as headphones amp
- Pad switch for use with active and passive basses
- Clean, overdrive and fuzz modes
- Drive and saturation controls
- 3-Band EQ with semi-parametric mid control
- Vintage and modern cabinet simulations
- Blend control for wet and dry signal mixing
- 3-pin XLR for balanced DI, pre or post effect switchable
- Footswitch-assignable thru (tuner) output
- Insert, stereo line input and ground lift
Product type | Guitar Amplifiers |
Technology | solid state |
Inputs | 2 |
Input connectors | 6.3 mm jack |
Input impedance | 1 M Ohm(s) |
Outputs | 4 |
Output connectors | 2 x 6.3 mm TS, 3.5 mm jack, XLR |
Output impedance | TRS 10000 Ohm(s), XLR 510 Ohm(s) |
Channels | 1 |
Indicators | on/off, peak, Signal |
Controls | Bass, Drive, ground lift, highs, input pad, Mid, mid frequency, Mode, mute, Pre/Post, volume |
FX loop | Yes |
Operating voltage | 9 V block, 9 V DC power supply |
Cabinet material | Die-cast aluminium |
Width | 100 mm |
Depth | 100 mm |
Height | 55 mm |
Weight | 0,36 kg |