คำอธิบาย...
Fischer Amps Hardwired In ear Belt Pack
English Description about Fischer Amps Hardwired In ear Belt Pack below
คุณสมบัติ
- เสียงดีกว่าระบบอินเอียร์ไร้สายมาก
- สลับจากโหมดสเตอริโอเป็นโหมดโมโนมิกซ์
- กำลังขับ 2 x 40mW พร้อมตัวจำกัด
- ควบคุมระดับเสียงและ Pan/MIX
- การออกแบบที่แข็งแรงและทนทานต่อการใช้งาน : โครงอะลูมิเนียม, คลิปหนีบเข็มขัดทำจากสแตนเลส, ช่องเสียบ Neutrik
- ขั้วต่อหลัก (แบบล็อคได้) เพื่อเชื่อมต่ออะแดปเตอร์หลัก DC ภายนอก
- แหล่งจ่ายไฟพร้อมแบตเตอรี่บล็อก 9V
- ชั่วโมงการทำงานด้วยแบตเตอรี่อัลคาไลน์ประมาณ 12 ชม. พร้อมแบตเตอรี่แบบชาร์จไฟได้ประมาณ 8 ชม.
สเปค
- ขนาด : ยาว x กว้าง x สูง (เป็น มม.): 127 x 82 x 30
- น้ำหนัก : 290 กรัม
- ขั้วต่ออินพุต : แจ็ค Neutrik XLR 3 ขั้ว 2 ตัว พร้อมอินเทอร์ล็อค
- ขั้วต่อหูฟัง : ขั้วต่อขนาดเล็ก 1/8 “(3.5 มม.)
- การตอบสนองความถี่ : 30 เฮิร์ต – 20 กิโลเฮิร์ตซ์ +/- 2 เดซิเบล
- ความต้านทานขั้นต่ำของหูฟัง : 12 โอห์มต่อข้าง
- ความต้านทานอินพุต : 15kohms
- ระดับอินพุต : 0dB – +4dB (ตัวจำกัดที่ +6dB)
- ระดับอินพุต Balance : 0 dBV
- สูงสุดของระดับอินพุต Balance : +4 dBV
- จำกัดระดับอินพุต Balance : ตั้งแต่ +5 dBV
- กำลังขับสูงสุดที่ 20 โอห์ม: 40 mW ต่อช่องสัญญาณ
- กระแสไฟทำงานสูงสุด : 40 mA
- แหล่งจ่ายไฟ : แบตเตอรี่อัลคาไลน์บล็อก 9V หรือแบตเตอรี่ NiMH แบบชาร์จไฟได้ 8.4V
- ปลั๊กอินพุต DC : ต่อ กำลังไฟฟ้าเข้า DC 9V (พิน +, แหวน -)
- เวลาใช้งานของแบตเตอรี่ : ประมาณ. 8 ชม. ด้วยแบตเตอรี่แบบชาร์จได้ขนาด 270mAh ประมาณ 12 ชม. ด้วยแบตเตอรี่อัลคาไลน์ (ขึ้นอยู่กับระดับเสียงของหูฟัง)
Wired, portable in-ear monitor system – our “classic” product!
Hard-wired headphone amp for those musicians whose instrument restrict their freedom of movement (keyboards, drums,
percussions, background vocals).
Two direct balanced XLR inputs (no special cable required, can also be connected asymmetrically)
Features
- Much better sound than with wireless in ear systems
- Switch-over from stereo to mono-mix mode
- 2 x 40mW output power with limiter
- Control for volume and pan/mix
- Sturdy and road-worthy design: aluminum casing, belt clip of stainless steel, Neutrik sockets
- Mains connector (lockable) to connect an external DC mains adaptor (optional extra)
- Power supply with 9V block battery (not included)
- Hours of operation with alkaline battery approx. 12h, with rechargeable battery approx. 8h
Specs
- Dimensions L x W x H (in mm): 127 x 82 x 30
- Weight: 290 g
- Input connectors: 2 Neutrik XLR jacks 3-pole, with interlock
- Earphone connector: 1/8″ (3.5mm) mini connector
- Frequency response: 30 Hz – 20 KHz +/- 2 dB
- Minimum impedance of earphones: 12 ohms per side
- Input impedance: 15kohms
- Nom. input level: 0dB – +4dB (limiter at +6dB)
- Nom. input level balanced: 0 dBV
- Max. input level balanced: +4 dBV
- Limit input level balanced: from +5 dBV
- Max output power at 20 ohms: 40 mW per channel
- Max. operating current: 40 mA
- Power supply: 9V block alkaline battery or 8.4V rechargeable battery NiMH
- DC-input plug: ext. input power DC 9V (pin +, ring -)
- Operating time of battery: approx. 8h with 270mAh rechargeable battery, approx. 12h with alkaline battery (depends on headphones volume)