รายละเอียดเพิ่มเติม...
English Description about Sweet Audio S200 Stereo Wireless In-Ear Monitor System below
- การประมวลผลเสียงดิจิตอล 24 บิต ที่เชื่อถือได้เพื่อสร้างการผสมผสานการตรวจสอบส่วนบุคคลที่เหนือกว่าสำหรับการแสดงแต่ละรายการ
- ช่องสัญญาณเสียงหนึ่งช่องจะถูกส่งไปยังเครื่องรับแบบคาดเอวที่ระยะไกลสูงสุด 50 เมตร ในขณะที่เทคโนโลยีเสียงดิจิทัล
- ช่วยให้มั่นใจในคุณภาพเสียงที่คมชัดโดยไม่มีเสียงรบกวนหรือสัญญาณขาดหายไป
- เครื่องส่งสัญญาณแบบครึ่งแร็คที่ทนทานพร้อมการควบคุมที่แผงด้านหน้าที่เรียบง่าย
- จอแสดงผล TFT แบบเต็มสี มุมมองที่กว้าง ความคมชัดสูง ใช้งานได้ทั้งหมด
- เงื่อนไขโดยสังเขป
- แผงด้านหลังจะปรับสมดุลอินพุตและเอาต์พุตลูปเพื่อให้สามารถเชื่อมต่อกับแหล่งกำเนิดเสียงและยูนิตอื่นๆ ได้อย่างสมบูรณ์
Professional Wireless Stage Monitoring System
INTRODUCTION
Wireless Personal monitoring system unmatched sound quality, Stable radio fequency performance and leading in the class of setup functions, to meet the requirements of most of the most demanding professional monitoring applications High frequency wireless back listening transmitter, high quality back listening. The use of superb circuit technology, allround round no dead Angle reception, so that the received signal is more stable, you can operate and switch the preset 10 groups of frequency excellent and reliable technology, to help you perform more excellent and successful.
The TFT-S4 is a wireless stereo Fanny pack receiver that works with a listening system. With 24-bit digital audio performance for clear sound quality and an effective 50-meter operating range, the TFT-S4 enables reliable wireless freedom of performance, covering every corner of the stage.
MAIN FUNCTION
- Reliable 24-bit digital audio processing to create superior personal monitoring mixing for each performance.
- One audio channel is sent to a waist pack receiver at a distance of up to 50 meters, while digital audio technology reliably ensure clear sound quality with neither noise nor signal loss.
- Rugged half-rack transmitter with simple front panel control.
- Full-color TFT display, wide viewing Angle, high clarity, all working
- conditions at a glance
- The rear panel balances inputs and loop outputs to provide full Connectivity to the audio source and other units.
TECHNICAL PARAMETER
Transmitter
Frequency range: 470 – 950 MHz
Audio input: Max input +18dBu
Power supply: 12-15 V DC
Consumption: 15V 300 mA
Transmitted power: 10mW~50mW (optional)
Receive
Frequency range: 470 – 950 MHz
Receiving sensitivity: -95dBm
The battery: Lithium battery 4.2V
Frequency response: 20-20,000 Hz
Audio output power: 100mW (1kHz@<1%distortion,peak power,@16)
Consumption: 200 mA
System
Distortion: <0.1%
Signal-to-noise ratio: 100dB
Frequency range: 470-950 uH Z
Bandwidth: 2MHz
Dynamic range: 100dB
Audio sampling: 24 bit/192 kHz
Launch system: Digital modulation
Audio response time: <, 5 ms
Audio coding: Digital coding
Frequency response: 20-20,000 Hz
Service distance: 50 meters
TRANSMITTER DIAGRAM
1. Switch on/off button
2. Connect the 6.35mm jack for the earphone
3. Volume knob
4. Function setting knob button
Press the Settings knob: Select Save Settings and return to the main screen
Rotate the Settings knob to change the value of a menu item
5. TFT display
1. Power socket
Used for external DC power supply 12V-1A
2. Wired microphone gain key
3. Audio input (left/right)
For connecting balanced or unbalanced outputs, any connector can be used
for mono inputs acceptable 1/4 inch or plug XLR connector
4. Loop (left/right)
The Audio signal sent to the transmitter can be copied to other devices
5. BNC port for the antenna
TRANSMITTER LCD INSTRUCTION
1. Channel display
Short press the function setting button, the channel will display the blue state to enter the channel setting, rotate the knob to select the channel (there are 01-10 channels), press the setting kob to confirm and exit the option, and display the currently selected channel.
2. Channel display
Short press the function setting button, the channel will display blue state to enter the channel setting, rotate the knob to select the channel (single channel, stereo), press the setting knob to confirm and exit the option, and the currently selected channel will be displayed.
3. Select high/low transmit power
Short press the function setting button, the power display blue state to enter the power setting, rotate the knob to select the power (high, low), press the setting button to confirm and exit the option, the current selection is displayed.
4. Gain display
Short press the function setting button, the gain will be displayed in blue to enter the gain setting, rotate the knob to select the gain(high and low), press the setting knob to select (on, off) Press the setting knob to confirm and exit the option, and the current selection will be displayed.
5. Lock
Long press the set knobokey to lockthe. transmitter, and long press the set knob key again to unlock. Press the setting button,rotate the knob to select (on, off) Press the setting knob to confirm and exit the option, and the current selection is displayed.
6. Input level display
PEAK light on indicates that the input level is too high
RECEIVER DIAGRAM
1. Antenna
2. On/Off button (single press mute)
3. Type-C charging port
4. 3.5MM input port
5. 3.5 Headphone jack
6. Volume plus
7. Volume reduction
8. OLCD display
9. Function key (single press to select function)
