Skysonic MF-1 Instrument And Mic Wireless
MF-1 is a kid of Wireless System for every instruments. Tiny but Powerful, there’s no any worries about the cable when you’re playing.
- UHF , 800MHz non compressed digital signal transmission
- Audio Frequencies Range: 20Hz to 16KHz
- The effective transfer distance of the MF-1 is up to 30 meters Without any barriers, and with no loss of quality to tone or compression.
- It can be Connected with the Phone and Headphone such Electronic System.
- It can maintain up to 3.5 wires condenser microphone input and audio input.
- Automatically Match, Plug and Play, High anti-Interference and without any delay.
- Build-in Li Battery, the system will be run for around 8 hours after a fully charge.
The MF-1 system is suitable for the varied musical instrument with the 6.35 output and amps with 6.35 input
Power On: Both of the MIC In and INPUT are compatible with the master Power, Please plug either MIC IN or INPUT if there’s any needs of turning on the power.
Power Off: the same reason as above, it should be unplug either the MIC IN or INPUT, then you can turn off the power.
Signal Code Matching Guidance
TRANSMITTER:Turn off the system, press and hold both the power switch and the signal code for three seconds, please release both of them after the transmitter is flickering
RECEIVER: Turn on the system, please press the signal code for quit after it’s flickering three times, it’s connected successfully if both of the transmitter and receiver are lit.
Tips: Lf it’s connected failed, please do it again as above.
Bluetooth Matching Guidance
Press and hold for seconds to turn on the Bluetooth, please turn on the phone and search for the name – SKYSONIC for matching, you can enjoy it after matching
Under the properly using, it needs to be charged when the indicator is flickered, please charge it in time.
You can enjoy it after turning on the power.