คำอธิบาย...
SHURE PGX14E-R14WL93TQG
SHURE PGX14/WL93 (UHF wireless Mic Clipset SHURE)
ประกอบด้วย PGX4 Diversity Receiver1 เครื่อง และ PGX1/WL93 Bodypack Transmitter 1 ตัว
PGX1 Bodypack Transmitter
Designed to meet the needs of traveling performers, the Shure PGX1 is available with PGX Wireless systems for headworn, lavalier, instrument microphones, or guitars / bass uses.
-
Automatic Transmitter Setup
- Multi-function LED Indicator (power, lockout, mute, low battery)
- 3 position gain switch (mic, 0, -10)
- 2 AA batteries provide 8 hours of continuous use
- 18 MHz, 300’ operating range
- Dimensions:108 mm H x 64 mm W x 19 mm D (4.25″ x 2.5″ x 0.75″
- PGX Wireless systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
SPECIFICATIONS
-
Audio Input Level
–10 dBV maximum at “mic” gain position
10 dBV maximum at 0dB gain position
20 dBV maximum at –10dB gain position - Gain Adjustment Range
30 dB - Input Impedance
1 megohm - RF Transmitter Output
30 mW maximum (dependent on applicable country regulations) Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) - Weight
81 grams (3 oz.) without batteries - Housing
Molded polycarbonate case - Power Requirements
2 AA size alkaline or rechargeable batteries - Battery Life
>8 hours (alkaline)
PGX4 Diversity Receiver
The Shure PGX4 receiver makes wireless setup a snap. With features like Automatic Frequency Selection and Automatic Transmitter Setup, the PGX4 offers the best in wireless to performers on the go.
PGX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
-
Automatic Transmitter Setup
- Automatic Frequency Selection
- 90 Selectable frequencies across 18 MHz bandwidth
- Up to 12 compatible systems*
- 1/4 wave antennas
- Microprocessor-controlled diversity
- Channel display LED
- XLR and 1/4″ outputs
Available with Handheld, Lavalier, Instrument, Guitar/Bass, and Headworn systems with PGX Wireless.
SPECIFICATIONS
-
Audio Output Level (ref. /– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ohm load): –19 dBV
1/4-inch connector (into 3000 Ohm load): –5 dBV - Output Impedance
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm - XLR output
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio - Sensitivity
–105 dBm for 12 dB SINAD, typical - Image Rejection
>70 dB, typical - Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply - Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.) - Weight
327 g (11.5 oz.)