Rode NT1/Ai1 Kit Complete Studio Set

RØDE’s AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The Complete Studio Kit comes with the AI-1, RØDE’s peerless NT1 large diaphragm condenser microphone, a shock mount and all cables. Let’s get started.

As for inputs: the AI-1’s got both kinds…

The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.

No cords barred (and other puns)

The Complete Studio Kit comes with the RØDE NT1 studio condenser microphone, a shock mount, pop-shield, RØDE XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer, and power – including 48V phantom power to your AI-1.

Superior Headphone Amplifier onboard

Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

SPECIFICATIONS

• AI-1 Studio-Quality USB Audio Interface

  Analog Inputs and Outputs	Input: 1 x Neutrik XLR-1/4″ / 6.35 mm combo Outputs: 2 x 1/4″ / 6.35 mm (impedance balanced), 1 x 1/4″ / 6.35 mm (headphones)
  Computer Connectivity	USB Type-C
  Form Factor	Desktop
  Mic Preamps	1
  Phantom Power	Yes
  Bit Depth	24-bit
  Sample Rates	44.1, 48, 88.2, 96 kHz
  Zero-Latency Direct Monitoring	Yes
  USB Bus Powered	Yes
  OS Requirements	Mac OS X 10.10 or later Windows 7 or later
  Dynamic Range	104 dBu
  Equivalent Noise	Equivalent Input Noise at Maximum Gain: -128 dBA (source impedance 150 ohms, 20 Hz to 20 kHz, A-weighted)
  Frequency Response	20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
  Gain Range	0 to 45 dB
  Input Impedance	XLR Mic Input: 1.3 kOhms Instrument Input: 0.9 MOhms
  Monitor Outputs	Max Output Level: -6 dBu
  Headphone Output	Max Output Power (at 1% THD): 32 Ohms, 24 mW, 300 Ohms, 245 mW
  Dimensions (D x W x H)	3.9 x 4.9 x 1.5″ / 100.0 x 124.0 x 38.0 mm
  Weight	19.8 oz / 561.3 g

  Packaging Info
  Box Dimensions (LxWxH)	6.9 x 5.0 x 2.5″

• NT1 Cardioid Condenser Microphone (Microphone Only)

  Analog Performance
  Operating Principle	Pressure Gradient
  Transducer	Condenser
  Diaphragm	1″ / 25.40 mm
  Polar Pattern	Cardioid
  Frequency Range	20 Hz to 20 kHz
  Equivalent Noise Level	4 dB A-Weighted
  Maximum SPL	132 dB SPL
  THD	1%
  Impedance	100 Ohms
  Sensitivity	-29 dB

  General
  Output Connectors	1 x 3-Pin XLR
  Operating Voltage	24 V 48 V
  Length	7.36″ / 187 mm
  Diameter	1.97″ / 50 mm
  Weight	0.97 lbs / 440 g

  Packaging Info
  Box Dimensions (LxWxH)	9.1 x 5.5 x 3.4″

• SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

  Dimensions	5.0 x 9.0 x 8.3″ (130 x 220 x 210 mm)
  Weight	9.2 oz (260 g)