คำอธิบาย...
Marani MIR880F
Marani MIR880F โปรเซสเซอร์ดิจิตอล รุ่นใหม่จาก Marani เป็นโปรเซสเซอร์ที่มี 8 อินพุต 8 เอาต์พุต มาพร้อมกับฟังก์ชันต่างๆ มากมาย เช่น Gain, Delay, Noise gate, EQ, Compression และฟิลเตอร์ FIR 512 Tap ทั้งอินพุตและเอาต์พุต โดยมีการประมวลผล Sampling Rate 96kHz
คุณสมบัติ
- ครอสโอเวอร์ 8 อินพุต 8 เอาต์พุต
- การประมวลผลระบบดิจิตอล ใช้ Sample rate 96kHz
- มีฟิลเตอร์ 3 แบบ คือ IIR, MIR และ FIR
- EQ อินพุต 27 แบนด์ มีให้เลือก 4 โหมด คือ 27 PEQ, 7PEQ Target + 20 PEQ, 13PEQ + FIR, 7PEQ Target + 6 PEQ + FIR
- EQ เอาต์พุต 8 แบนด์ มีให้เลือก 4 โหมด คือ XOVER-IIR + 8PEQ, XOVER-MIR + 8PEQ, XOVER-FIR + 8PEQ, XOVER-IIR + FIR + 4PEQ
- ช่องอินพุตและเอาต์พุตแต่ละช่อง มีฟิลเตอร์ FIR 512 Tap
- สามารถบันทึกการตั้งค่าได้สูงสุด 32 พรีเซ็ต
- เชื่อมต่อและควบคุมผ่านคอมพิวเตอร์ โดยใช้ สาย Lan
FEATURES
- The whole machine operates at a sampling rate of 96KHz, and the frequency response remains flat between 20Hz-45kHz.
- Complete 8 input processing channels +8 output processing channels, maximum simultaneously 12 output channels (analog +Dante)
- Innovative full matrix mixing, input channels are sent to plug-in nodes in any proportion, different plug-in nodes can also be mixed into one or more output channels, or even two adjacent output channels can be mix into the physical output channel.
- The input channel is equipped with dynamic loudness filter and automatic RMS compressor, which can effectively control the signal dynamics of the input channel. The new design has a hard limiter with very low distortion, which can prevent the burst large dynamic signal from damaging the speaker unit and effectively guarantee the safety of the system.
- AutoEQ automatic balancing algorithm, can run at the input/plug-in/output position, one-click measurement of impulse response, according to manually set or automatically calculated flat frequency response. You can use pure IIR/ pure FIR/IIR+FIR mixed modes to completely solve the phase problem.
- Up to 4096Taps FIR filter.
- New MIR linear phase crossover filter: The MIR linear phase crossover filter is a brand new frequency crossover filter, can use any of the classical filter shape, without any phase distortion, so that the phase curve remains original.
- A network interface is configured to connect to the PC directly through a network cable. By default, DHCP automatically obtains an IP address.
- New group Settings, can control up to 128 processors at the same time, can be unified control gain, mute, PEQ and polarity, increase the convenience of multi-machine turning.
- Advanced Plugins, including 96kHz extended bandwidth FIR filter and Dynamic EQ..etc.