หัวแอมป์กีตาร์ ENGL Savage 120 E610

Features

Clean & Crunch I Channels

Featured on main channel 1 are the clean and crunch I channels, with a 3-band EQ and independent volumes for excellent tone shaping. While both channels share the gain, the Crunch I also features an additional gain control for adding extra sonic breakup to deliver even more crunch. The sense switch sets the main channel’s sensitivity to either low or high, while the bright switch adjusts the level of high end boost. Activating the preshape control will boost the amp’s bass and treble while cutting the mids, and deactivating the preshape will reduce the amount of bottom end while boosting the mids. Use the contour control to boost the upper mids and cut the lower mids, or keep it switched off for a boosted lower midsection.

Crunch II & Lead Channels

Main channel 2 features the crunch II and lead channels, with independent volume controls, 3-band EQ, and hi balance control offering excellent tone shaping capabilities. The lead channel is equipped with a boost switch and additional gain controls, allowing players to dial in extra distortion for a truly punchy tone. Its contour switch is ideal for boosting the upper mids and cutting the lower mids, or leaving it off will provide a boosted lower midsection. The addition of a rough/smooth switch provides two unique overdrive characteristics, with the rough setting emphasising the highs and lows while the smooth setting emphasises the mids and supresses the gritty upper frequencies.

Excellent Connectivity

The amp features a range of ins/outs for players to expand their performance, allowing the connection of footswitches or MIDI devices to remotely control the amp’s functions and enhance the overall performance. The stereo jack designed footswitch inputs can be used to connect footswitches to switch between the four channels, the presence controls, the two master controls, or the rough/smooth settings. The featured FX loops allow the connection of external stompboxes, with a balanced control to adjust the level the effects unit influences the amp. With choices between 4 ohm parallel, 8 ohm parallel, and 16 ohms power amp outputs, the amp head can seamless connection to a range of speaker cabinets.

Features

• One of ENGL’s best-known amp heads which sets ne standards in modern rock music
• 4 channel setup offers an extensive range of rock ready tones
• Wide variety of controllable parameters provide excellent tone shaping capabilities
• ECC83 and KT88 tubes deliver incredible dynamics and tonal power
• 120 Watts of power offers plenty of headroom, suitable for a variety of gigs and large venues
• FX loops for connecting external effect devices to expand tonal possibilities
• Footswitch inputs allow external control over amp’s functions
• Line output provide direct connection to mixers and recording devices
• Made in Germany

Specifications

General

• Channels: Clean, Crunch 1, Crunch 2, Lead
• Power: 120 Watts
• Impedance: 4, 8, 16 Ohms

Tubes

• V1: ECC83/7025 F.Q.
• V2, V3, V4: ECC83/12AX7 Selected
• V5, V6: ECC83/12AX7 Standard
• V7, V8: KT88 Matched Sets

Controls

• Knobs:
  • Main Channel 1: Gain, Crunch 1 Gain, Bass, Middle, Treble, Clean Volume, Crunch 1 Volume
  • Main Channel 2: Gain, Lead Gain, Bass, Middle, Treble, Hi Balance, Crunch 2 Volume, Lead Volume
  • Power Amp Section: Presence A, Presence B, Master A, Master B
• Switches:
  • Main Channel 1: Sensitivity (Lo/Hi), Bright (Lo/Hi), Preshape, Contour, Clean/Crunch Channel Select
  • Main Channel 2: Lead Boost, Contour, Rough/Smooth, Crunch 2/Lead Channel Select
  • Power Amp Section: Depth Boost (Lo/Hi), Presence A/B, Depth Boost (Lo/Hi), Channel Select, Master A/B
• FX Loop: 2 x Balance (Dry/Effect), FX Loop Status Switch
• Balanced Line Out: Level, Preamp/Power Amp Switch

Connections

• Input: 1/4” Jack (Instrument)
• Input Level:
  • Sense Hi: -44dB, -2dB Max.
  • Sense Lo: +37dB, +5dB Max.
• FX Loop: 2 x Send, 2 x Return (1/4’’ Jack)
  • Send: -10dB (Average), -3dB Max.
  • Return: +3dB Max.
• Footswitch: 2 x 1/4’’ Jack
  • Master A/B, Presence A/B
  • Crunch 2/Lead, Rough/Smooth
  • Channel 1/Channel 2, Clean/Crunch 1
  • MIDI Interface Port (ENGL Interface or Custom Footswitch Only)
• Balanced Line Out: 3-Pin XLR
• Power Amp Output: 2 x 4 Ohms Parallel, 2 x 8 Ohms Parallel, 1 x 16 Ohms

Power Requirements

• Power Consumption: 300 Watts Max
• Frequency: 50 Cycles
• Fuses:
  • External: 2.5 AM (Medium)
  • Internal: 3.15 AT (Slow)
  • Power Amp (ESC): 2 x 315 mAM

Dimensions

• Width: 27.9” (71 cm)
• Height: 10.6” (27 cm)
• Depth: 10.6” (27 cm)
• Weight: Approx. 20 kg